Choice of material for bathroom cladding

Floors in the house are not only a necessity but also an important component of the interior. They should be smooth, neat, and beautiful. An uneven floor will not even allow you to put anything on it, and an ugly base will immediately spoil the overall appearance of any room. The toilet floor is no exception. And during the repair, it, like the base in any other room, you need to pay special attention.

The bathroom should be practical, meet sanitary requirements, and do not forget about functionality. If the bathroom is combined with a bath, then the room is characterized by high humidity, so finishing bathrooms is not an easy task, very often you have to think about what materials to choose.


Types of finishes for bathrooms

The modern market offers a variety of materials for wall decoration, but for bathrooms, it is preferable to choose:

  • Moisture-proof drywall.
  • Plastic panels.
  • Ceramic, mirror, and glass tiles.
  • Decorative plaster.
  • Painting with water-resistant paints.
  • Wallpapering.

The Council. For bathrooms, you need to choose a finish that will withstand the high humidity of the room and complex wet cleaning with chemical additives.

The material that will cover the floor in the toilet must be moisture-resistant. And it’s not just the increased humidity level. In the toilet, it is important to maintain hygiene – cleaning here has to be done much more often than in other rooms, and more carefully. So, when cleaning floors, most likely, strong chemicals will be used, the purpose of which is to achieve the maximum level of cleanliness and safety of the room for health. This means that the floor covering must be able to withstand this impact.

You should also choose a coating that is not only strong but also smooth and smooth – this aspect will greatly facilitate the cleaning process. But the floor should not be excessively slippery – you can easily slip on it, and a fall in such a room as a toilet is fraught with serious injuries.


What material should I choose for the floor?

the choice of material for finishing the bathroom

Before choosing materials for finishing walls and floors in the toilet, consider what characteristics they should have:

  • Hygiene. In small bathrooms, wet cleaning is often required, which means that the walls and floors in the toilet must withstand even the aggressive effects of chemicals.
  • Strength. In order not to change the wall covering in the toilet every 2-3 years, choose the most durable materials that will not lose their appearance for a long time.
  • Moisture resistance. Of course, the humidity level here is much lower than in the bathroom. But contact with water is inevitable, so for finishing instead of paper Wallpaper, for example, choose washable non-woven.
  • Protection from mildew. High humidity creates ideal conditions for the development of mold, so it is necessary to protect the surface.


The process of finishing the floor in the toilet room will largely depend on the final result to be obtained and the condition of the floors at the moment. So, in some cases, they do not need to be leveled – you just need to remove the old coating and put a new one with a small equalization. And in another case, you will have to do everything from scratch-fill the screed, align, and only then put the selected material.

Preparing the base for a new coating without this process can not do both when creating a floor “from scratch”, and-sometimes-in the case of replacing the coating. For example, after removing the old ceramic tile, you can not immediately put a new one on the floor base. You will first need to clear the surface of debris and align it. And the floor itself can be uneven, especially if we are talking about an old house.

When building a new house, the floor is likely to be made so even at the stage of filling the screed that additional alignment is not required. Important! You should also consider the need for waterproofing when arranging the floor in the toilet. A layer that can contain the flow of water, which may well appear in a plumbing accident, will protect neighboring apartments below the floors from flooding.

Most often, in order to make the floors even, a concrete screed, special levelers, or a self-leveling floor is used. Previously, only concrete screed was used for this purpose. But it is quite complex in the device and requires a lot of time to dry (up to 28 days). Now, if you already have a more or less usable base, it is easiest to apply the technology of self-leveling floors – this will significantly reduce the time spent. Moreover, the filling mixture is quite fluid, it will easily fill all the voids and irregularities on the surface of the base, which will allow you to get the most solid and reliable base for the finishing material.


How to equip 3D polymer floors?


3d floor in the toilet

A great solution for floor design can be self-leveling floors with a 3D pattern. They are smooth, easy to clean, moisture-resistant, durable, non-slip, and most importantly-beautiful. You can create absolutely any drawing on the floor. In order to make such a floor, you will need a special polymer composition that will become the basis of the floor, you need to place a printed drawing on top of it, and then cover it with a transparent layer of polymer.

How to tile a bathroom floor around a toilet?


floor tiles in the toilet are one of the most beautiful and practical solutions

The first thing that comes to mind when choosing a wall decoration in the toilet room is ceramic tile. It is her choice by many owners of apartments and houses for a variety of designs, strength, durability, and ease of care.

Putting tiles on your own is not as easy as it seems at first glance. However, this process can be completely carried out with your own hands, without resorting to the expensive help of masters. The main thing is to act carefully, carefully, consistently. Before you start laying tiles, it is important to make sure that all the recommendations for this type of work are followed. So, you should make sure that the tile used is really intended for the floor. It is not recommended to put tiles for walls under your feet.

The Council!  To determine the tile’s identity, it’s packaging, or rather, the symbols on it will help. It is important to study it carefully. You should also pay attention to the size of individual coating elements. So, you will have to work with small tiles for longer, but it is almost not necessary to cut it. But the large one will have to be crushed to the necessary parameters, although in General, you can complete work with this material quickly. In any case, you will have to take into account the size of the toilet or bathroom – in a small room, large tiles will look out of place. Also, the tile for the toilet should be somewhat rough, so as not to slip on it. It is recommended to choose a material without gloss.

The Council!  Tile beginners are best to put the tile simply, joint to joint, in even rows. People without experience should not try to implement the diagonal version and other complex variations.

How to Vinyl and quartz vinyl tiles a bathroom floor around a toilet? 


vinyl flooring in the toilet

Instead of tile, you can use quartz vinyl or vinyl tile. Vinyl tile, as you might guess, is made of PVC and has a number of advantages. This is a low cost, ease, good heat, and sound insulation qualities, strength. Also, if you choose this type of floor covering, you can choose any color and pattern-PVC tiles that have a significant color range.

Kwarcevania tile is also a plastic material but used in the manufacture of quartz sand. This improves the wear resistance of the coating, fire and chemical resistance, and makes the tile non-slip.


What gender to do in the toilet – you will have to decide on your own. However, regardless of the chosen coating, the base will have to be carefully leveled and prepared. You can’t neglect this, otherwise, all the work will go to waste.